Adding Reports to Report Groups

To add a report to a report group, enter 2 in the Optfield for either the group or another report within it on the Work with Report Scheduler screen (STRAUD > 41 > 51) as shown in Scheduling Reports. The Add Report Definition screen appears:

​                            ​ Add Report Definition​                                                                                                                ​ Reports in a group run periodically, as per the group definition.             ​  ​ If ZIP(*YES) is specified for the Group, the mail info is taken from the Group. ​ Other parameters defined for the report, override group parameters.             ​                                                                                 ​ Group​ ABTEST ​   ​ Test for Documentation                            ​             ​                                                                                 ​ Type choices, press Enter.​                                                                                                                                       ​ Report Id.  . . . . . .​ ​    4​                                                   ​ Description . . . . . .​ ​ Run FireWall Query                                ​     ​ Reporting command (F7).​ ​ RUNFWQRY  ​     ​ Command, F7 or *SELECT to select​                                ​ Run FireWall Query                                ​     ​ Report parameters (F4). ​                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       ​                       ​                                                                                 ​ F3=Exit​   ​ F4=Set Parameters​   ​ F7=Select Command​               ​ F12=Cancel​     ​                                                                                 ​

The screen contains the following fields:

Group

A read-only field showing the name and text description of the report group, as set on the Define AU Report Group Details (DFNAUGRPD) screen, as seen in Adding or Modifying Report Groups.

Report ID

A read-only field showing the numeric report identifier.

Description

A free-form text description of the report, as relevant to the report group.

Reporting command

The command that runs the report. By default, this is RUNAUQRY. To select other commands, press the F7 key.

Report parameters

A read-only field showing the parameters for the Reporting command. To set or change these, press the F4 key.